FTCS-1512-H6D

F-TONE¡¯s FTCS-1512-H6xx Small Form Factor Pluggable (SFP)transceivers are compatible with the
Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1550nm DFB laser and the APD .The module data link up to 160KM in 9/125um single mode fiber.The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.

²úÆ·Êý¾ÝÊֲ᣺ÉÌÒµ¼¶ÍƼöÐͺÅFTCS-1512-H6D¡¢¹¤Òµ¼¶ÍƼöÐͺÅFTCS-1512-H6DI ¡£

FTCS-1512-H2xx_V3.03.pdf  FTCS-1512-H2xx_V3.03.pdf (571.0 KB, 191 ´Î)

SFP×ù×ÓÊý¾ÝÊֲ᣺ÍƼöÐͺÅSFP006-L

SFP007-L_V3.03.pdf  SFP007-L_V3.03.pdf (110.9 KB, 1,022 ´Î)

SFPÁý×ÓÊý¾ÝÊֲ᣺ÍƼöÐͺţºSFP007-L

SFP006-L_V3.03.pdf  SFP006-L_V3.03.pdf (425.7 KB, 865 ´Î)

ÐÎò

1.25Gb/s 1550nm Single-mode SFP Transceiver


Features  

  • Up to 1.25Gb/s data links

  • The DFB laser transmitter  

  • APD receiver 

  • Up to 160km on 9/125?m SMF 

  • Hot-pluggable SFP footprint 

  • Duplex LC/UPC type pluggable optical interface 

  • Low power dissipation 

  • Metal enclosure, for lower EMI 

  • RoHS compliant and lead-free 

  • Support Digital Diagnostic Monitoring interface 

  • Single +3.3V power supply 

  • Compliant with SFF-8472 

  • Operating case temperature: 

Standard : 0 to +70¡ãC

Industrial : -40 to +85¡ãC 


Applications

  • Gigabit Ethernet

  • Fiber Channel

  • Switch to Switch interface

  • Switched backplane applications

  • Router/Server interface

  • Other optical transmission systems

Description

F-TONE¡¯s FTCS-1512-H6xx Small Form Factor Pluggable (SFP)transceivers are compatible with the 

Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1550nm DFB laser and the APD .The module data link up to 160KM in 9/125um single mode fiber.The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access. 

ÆäËûÐÅÏ¢

²úÆ·ÖÖÀà

²úÆ··â×°

¹âÏËÀàÐÍ

²úÆ·²¨³¤

²úÆ·ËÙÂÊ

,

²úÆ·µçѹ

´«Êä¾àÀë

Êý×ÖÕï¶Ï

²úÆ·¼¶±ð

ÉÌÒµ¼¶

Ðźŵçƽ

Õì²âµçƽ

ÉúÃüÖÜÆÚ

¹âÏËÌÖÂÛ